Mesh2CW - CW practice over MeshCore
===================================

INSTALL
  Unzip so the Mesh2CW folder sits somewhere you can write to, for example
  C:\Mesh2CW or your Documents folder.  Do NOT put it in Program Files.
  Mesh2CW keeps its settings (config.json) and log (mesh2cw.log) in this
  same folder.

BEFORE YOU START
  Close the MeshCore app on this PC.  Only one program can use a radio at
  a time.

CONNECT
  LINK      MeshCore WiFi  (radio's IP address)  or
            MeshCore USB   (radio's COM port - press RST on the radio first)
  CHANNEL   the net's channel name, e.g. Public
  Press CONNECT.  The status line turns green when connected.

  Others see you by your RADIO'S name.  Type your call sign and press
  SET RADIO NAME to change it.

SENDING
  Type, or key with your adapter (KEY: Vail / Spacebar / Mouse), then press
  SEND or Enter.  Key 8 dits to erase the last word.

PROBLEMS
  Send mesh2cw.log from the Mesh2CW folder to the net organiser.
